The exact model helps identify the correct parts

Call (740) 744-2724

Find an appliance model number

Find the label before anyone guesses at parts.

The brand and appearance are not enough. The complete model number identifies the appliance design, compatible components, and technical information. Use this guide to find and photograph the label without pulling out a heavy machine or removing a panel.

Model numberIdentifies the design
Serial numberIdentifies your individual unit
Complete label photoPreserves letters and suffixes
No unsafe movingCheck accessible locations first

What you are looking for

A rating label—not the name printed on the door.

The appliance’s front may say Profile, Duet, Bravos, Gallery, Bespoke, Cabrio, or another product-family name. That is useful context, but it is not normally the complete model number needed to identify parts.

Look for a rectangular rating plate or sticker that explicitly uses wording such as Model, Model No., MOD, or Model Code. The same label usually includes Serial, S/N, electrical information, and certification marks. Some newer labels also include a QR code.

Copy every letter, number, dash, slash, and suffix. A missing final letter or revision suffix can point to the wrong component.

The easiest method: clean the phone camera lens, turn on a light or flashlight, hold the phone square to the label, tap the text to focus, and photograph the entire sticker. Keep the uncropped original so Leon can zoom in.

Common label locations

Open a door or compartment before moving the appliance.

Locations vary by manufacturer and model. Start with the safe, visible areas below and stop if finding the label would require moving a heavy appliance, disconnecting utilities, or removing a service panel.

1

Dryer

Open the dryer door and inspect the rim of the cabinet opening, the door frame, and the area just inside the opening. On some ventless units the label may be behind an accessible water tank. Do not pull out a stacked or gas-connected dryer merely to check the rear.

Dryer repair details →
2

Front-load washer

Open the door and inspect the cabinet frame around the opening and the area near the door seal. Do not peel back or damage the rubber boot. A flashlight and a phone photo usually make a low-mounted label easier to read.

Washer repair details →
3

Top-load washer

Lift the lid and check the tub rim or underside of the lid. Some brands and older models place the tag on the upper rear console or a side panel. Do not tilt or drag the washer to reach a hidden tag.

4

Refrigerator or freezer

Check inside the fresh-food compartment along the upper side walls, near the ceiling or control housing, and around the crisper area. Upright and chest freezers may use an upper interior side wall. Do not confuse a water-filter number with the appliance model.

Refrigerator repair details →
5

Dishwasher

Open the door fully and inspect the left and right tub frame, top edge, and sides of the door. The tag is often invisible when the dishwasher is closed but should not require removing the machine from the cabinet.

Dishwasher repair details →
6

Range or freestanding oven

Open the oven door and inspect the frame around the cavity. Also check the frame behind or beside the lower storage drawer when it can be opened normally. Do not lift a cooktop or reach near gas or electrical connections.

Cooking-appliance details →
7

Wall oven or cooktop

A wall-oven tag is often on the cavity frame or near the top of the opening with the door open. Cooktop labels are commonly on the underside, which may only be safely visible from an accessible cabinet below. Do not lift an installed glass cooktop to look.

8

Built-in or over-the-range microwave

Open the door and check the front frame, door opening, right-hand vent area, and underside near the control panel. Countertop and portable microwaves are outside Wonkeeland’s normal service list.

Built-in microwave details →
Do not create a second problem while looking for a label. Never pull a heavy, stacked, plumbed, gas-connected, or built-in appliance forward just to find the rear sticker. Do not remove access panels, reach near live electrical parts, lift a glass cooktop, or strain against an appliance that may damage flooring or utilities.

How to photograph the tag

A clear photo beats a mistyped model code.

  1. Turn on more light. Use a flashlight from an angle if the label is glossy and the phone flash creates glare.
  2. Hold the phone parallel. A square angle keeps the far end of a long code from becoming blurry.
  3. Tap to focus. Tap the model-number line on the screen and wait for the characters to sharpen.
  4. Take one full-label photo. Include the entire sticker, not just the characters you believe are the model.
  5. Take a closer second photo. Make the model and serial lines large enough to read, but keep the uncropped original.
  6. Check it before closing the door. Zoom in and confirm the last characters are visible.

Do not post a serial number publicly. Send the label photo only through the customer communication method Wonkeeland provides for the appointment.

Why this helps your appointment

The model number turns “a Samsung dryer” into a specific machine.

Different appliances can share the same brand, size, color, and outward appearance while using different heating elements, pumps, controls, sensors, motors, or wiring. The model code lets Leon research the correct parts diagram and identify whether a commonly stocked component is even compatible.

Providing the model does not guarantee a one-visit repair. The failed part is still unknown until diagnosis, a model can have production changes, and specialized components may require ordering. It does improve preparation and reduces preventable delays.

When scheduling, also describe what the appliance does, when the symptom occurs, any error code, and anything that changed immediately before the problem began. The appliance brand service guide explains how Wonkeeland evaluates major brands, Kenmore source codes, parts support, and independent warranty work.

Model-label questions

Appliance model-number FAQ

What is the difference between the model and serial number?

The model number identifies the appliance design and is used to locate compatible parts and technical information. The serial number identifies your individual unit and can help determine production changes or warranty details. They normally appear on the same rating label.

Should I move the appliance to find the number?

No—not if it is heavy, stacked, plumbed, gas-connected, built in, or likely to damage the floor. Check accessible door openings, frames, compartments, documents, and manufacturer accounts first. Leon can look for a difficult tag during service.

Is the name printed on the door the model number?

Usually not. That is often a product line or feature name. Find a label that explicitly says Model, Model No., MOD, or Model Code and usually lists the serial number beside it.

Can I send Wonkeeland a photo of the label?

Yes. A square, well-lit photo of the complete label is often more reliable than typing a long code. Keep the uncropped original because suffixes at the edge can affect compatibility.

Do you need the serial number too?

The model number is the primary identifier for parts research, but the serial number can matter when a manufacturer changed components during a production run. Photographing the complete label captures both.

What if the sticker is missing or unreadable?

Check the owner’s manual, purchase record, registration email, manufacturer account, or original packaging. Do not order a part based only on appearance; similar-looking appliances may use incompatible components.

Manufacturer references

Examples from official model-label guides.

Exact locations vary, so use the instructions for your manufacturer and appliance whenever available.

Whirlpool model and serial locator

Whirlpool’s official guide lists common tag locations for laundry, dishwashers, refrigeration, ranges, cooktops, wall ovens, and microwaves.

Open Whirlpool Product Help →

GE Appliances locator

GE explains what its rating plates look like, how model codes differ from warning-label numbers, and where appliance-specific tags may be found.

Open GE Appliances support →

Samsung repair preparation

Samsung recommends having the product model and serial number available before beginning a home-appliance repair request.

Open Samsung Support →

Model number found?

Bring the exact machine into the conversation.

Schedule the $89 diagnostic and keep the clear label photo available for Wonkeeland’s appointment messages.